Eagle V5G (5-Axis)

The Eagle V5G (Graphite Version) is designed to be an ultra-rigid 5-axis vertical machining center with the capacity to handle a 550-pound workpiece on a 15.75-inch rotary table surface. The Heidenhain TNC-640 control unit with a 17” display is mounted on a moveable pedestal for optimal positioning convenience. The Eagle V5G is designed with side opening in the casting to allow robot loading from the right side with pallets up to 15.7” square.

The Eagle V5G gantry-type 5-axis machining center is built and designed to be highly rigid and incredibly precise. To achieve high rigidity and fine finish, the Eagle V5G employs a cast iron bed with BIOCAST®-design and topology optimized structure for optimal stiffness and temperature symmetry.  Sand is kept inside the casting for best vibration damping and higher weight, therefore optimum behavior between moving and static mass.  The Eagle V5G’s B-axis uses a zero backlash gear drive while the C-rotary axis utilizes a Direct Drive motor, complimented with direct rotary encoders. This is superior to the conventional worm gear setup in drive transmission and power efficiencies. 

It is also equipped with a 20 HP 42,000 RPM integrated spindle, heavy-duty roller-type linear guideways, large diameter ball screws and linear glass scales in the X, Y and Z-axis. The Eagle V5G is capable of performing high-precision cuts with the X-, Y-, Z-, B- and C-axes moving simultaneously. Inclined surface machining, spiral contour machining, irregular contour machining and other complex cutting tasks can be made simple with the Eagle V5G.

Eagle V5G (5-Axis)

Schedule a free test cut

Call 866-916-8388
 

SCHEDULE NOW »
 

Get special financing

Discover the MAC Funding difference.
 

LEARN MORE »
 

 

  • Specifications
  • Overview/Features
  • Floorplan / Layout
  • Request more information
Machine Travels: X x Y x Z in (mm) 21.6 x 15.7 x 15.7 (550 x 400 x 400)
B-Axis Tilt Range Degree (RPM) -120° ~ 60° (25)
C-Axis Rotation Range Degree (RPM) 360° (60)
Rotary Table Faceplate: dia. (mm) 15.75 (400)
Max Workpiece Height: Faceplate/Pallet (mm) 15.7/12.7 (400/325)
Max Rotary Table Cap: lb. (kg) 550 (250)
Spindle Speed 42,000 RPM 
Spindle HP (S1 100%) 20 HP (15 kw)
Spindle Nose to Table: in (mm) 2.0 ~ 17.7 (50 ~ 450)
Tool Changer Selection HSK-E40 (32 pos std) / (100 pos optional)
X, Y, Z Rapid Speed: in/min. (M/min.) 1181 (30)
Max Workpiece 3-Axis / in/lb. (mm/kg) X 21.6 x Y 15.7 x Z 15.7 / 1102 ( 550 x 400 x 400 / 500)
Machine Weight: lb. (kg) 15,873 (7,200)
Mach Dimensions W-D-H: in (mm) 79.5 x 110.2 x 96.5 (2,020 x 2,800 x 2,450)

Overview

The Eagle V5G (Graphite Version) is designed to be an ultra-rigid 5-axis vertical machining center with the capacity to handle a 550-pound workpiece on a 15.75-inch rotary table surface. The Heidenhain TNC-640 control unit with a 17” display is mounted on a moveable pedestal for optimal positioning convenience. The Eagle V5G is designed with side opening in the casting to allow robot loading from the right side with pallets up to 15.7” square.

 

Features

  • Integrated 4/5-Axis System (without T-slot table)
  • Max Acceleration: 49ft/s²
  • HF Spindle 20hp, 42,000 RPM, HSK-E40 and 32 pos ATC (100 optional)
  • Renishaw Infrared Measuring Probe
  • Blum Laser System for tool breakage detection and tool length/diameter compensation
  • Vibration Dampening cast iron bed with sand filled BIOCAST®-design
  • Three-Point Foundation Setup/Leveling
  • Ball Screws with Direct Drive AC Motors
  • Absolute Measuring with Glass Scales
  • Oil Mist Lubricant System, spindle external
  • 2-Color Status Light
  • Auto-Lube System both drives and ways
  • Full lining with dust and liquid protection
  • LED Machine Lamp in work area
  • Chip Tray
  • Heidenhain TNC-640 5-Axis Simultaneous Control
  • Precision Package Three for 5-axis machines: Temperature-distribution compensation, incl.
    • ATDC - Automatic Temperature Drift Control
    • 5-Axis Compensation
    • HEIDENHAIN option Kinematics Opt
    • Ceramic Ball for Kinematics accord

OPTIONAL ACCESSORIES

  • HF Spindle 20 HP, 36,000 RPM, HSK E50 w 32-pos ATC
  • 100 Position ATC HSK E40
  • 80 Position ATC HSK E50
  • Table Clamping and Pallet Systems from EROWA, Hirschmann and System 3R
  • ICS 2 ATS Internal coolant supply with aerosol dry lubrication
  • T-Slot table to cover the 4/5-axis (Converts the machine to 3-axis operation)
  • Keller Exhaust System for Graphite and Mist Collection
  • 3-Color Status Light
  • Oil mist suction unit
  • Chip conveyor for dry milling (incl: chip bucket)
  • DCm (Dynamic Collision Monitoring)
  • MultiChange Easy Basic Unit (incl: gripper, 40-pos or 5-pos or 4-pos magazine, workpiece change place and connection to machine)
Eagle V5G (5-Axis) - Floorplan / Layout


Fields with * are required.

5-Axis MachiningGraphite and Hard MillingMold and Die