LUMEX Avance 25

The LUMEX Avance-25 metal laser sintering hybrid milling machine is the only machine in the world which relies on one-machine, one-process manufacturing of complex molds and parts by fusing metal laser sintering (3D SLS) technology with high speed milling technology. The machine enables production of complicated parts through total manufacturing by digital engineering, using 3D data. The machine achieves the highest accuracy in part fabrication since metal powders are melted and sintered via laser, while surfaces are precisely milled at high speeds.

LUMEX Avance 25
  • Specifications
  • Overview/Features
  • Videos
  • Floorplan / Layout
  • Request more information
Machine Travels: X x Y x Z in (mm) 10.2 x 10.2 x3.9 (260 x 260 x 100
Sintering Table Travel: U in (mm) 7.3 (185)
Sintering Blade Travel: W in (mm) 20.5 (522)
Table Size X- Y: in (mm) 10.6 x 10.6 (270 x 270)
Max Table Cap: lb (kg) 200 (90)
Max. Workpiece Size: W x D in (mm) 9.8 x 9.8 (250 x 250)
Distance from Floor to Table in (mm) 38.6 (980)
Spindle Nose to Table in (mm) 0.4 ~ 3.5 (10 ~ 90)
Spindle Speed RPM 450 ~ 45000
Spindle HP (cont/30 min) 3.0 (4.4)
Spindle Torque ft.lb. (Nm) 0.5 (0.7)
Spindle Taper 1/10 #20
Rapid Feedrate X, Y, Z: in/min (M/min) 2362, 2362, 1181 (60, 60, 30)
Cutting Feedrate X, Y, Z: in/min (M/min) 2362, 2362, 1181 (60, 60, 30)
Axes Acceleration: G 1.0, 1.0, 0.5
ATC Tool Shank Type Matsuuura #20
ATC Storage Capacity 20 Tools
Max. Tool Diameter: mm 10
Tool Support Length of Tool Holder: Α mm α≧3×φ(φ=3,4,6,8,10)
Tool Max. Protrusion Length from Tool Holder: Β mm β≦5×φ(φ=3,4,6,8)     β≦30 (φ=10)
Max. tool weight: lb (kg) 0.55 (0.25) with holder / 0.11 (0.05) tool only
Laser Type Yb Fiber Laser
Oscillator Output Range w 40 ~ 400
Laser Scanning Module X / Y-Axis Galvano Scanner System
Laser Scanning Module Z-Axis Linear Translator
Power Requirements [KVA] 39
Compressed Air Supply Presure / Volume: PSI / cu.ft/min. 85 ~ 135 / 18
Spindle Oil Cooler Cap: gal (L) 1.8 (7)
Mach Dimensions W-D-H: in (mm) 126.0 x 183.0 x 80.7 (3200 x 4650 x 2050)
Machine Unit Weight: lb (kg) 9900 (4500)
Available Metal Powders: 22lb cont. HR Steel
Maraging Steel (52Rc after Heat Treat)
630 Stainless Steel
316L Stainless Steel

Features

Standard accessories include:

  • Total Enclosure Guard plus Top Side Cover
  • Door Interlock
  • Oil Temperature COntroller
  • Air Dryer
  • Linear Motor Cooler
  • Scale Feedback X/Y/Z - Heidenhain (absolute)
  • Z-Axis Balance Cylinder
  • Nytrogen Gas Separator
  • Interior Temperature Sensor
  • Oxygen Densitometer
  • Fume Collector
  • Spindle Oil Chiller Unit
  • Feed Axis Grease Auto Feeder - X/Y/Z-Axis Guide Only
  • CCD Camera/Image Processor
  • Glavanor Scanner/Laser Controller
  • Preheating Heater/COntroller - Sintering Table Use
  • Sensor for Auto Tool Measurement (Contact type)
  • WOrking Lighting Apparatus
  • Three-Tier Patlite  (Red/Yellow/Green from top)
  • Spindle Integrated Run Meter
  • Laser Integrated Run Meter
  • Guide Light Function
  • IPC Function
  • 15-inch LCD with Touch Panel
  • Qwerty Key-Arrangement Keyboard
  • USB Interface - 2 Ports
  • Table High Temperature Alarm
  • 100-VAC Outlet 3A
  • Tools/Tool Box
  • Machine Color Paint
  • Leveling Pads/Bolts
 
LUMEX Avance 25 - Floorplan / Layout


Fields with * are required.

Additive Machining